The correct installation and maintenance of the planetary gearbox is the key to the normal operation of the planetary motor. Therefore, when you install the planetary gear motor, please install it strictly according to the following installation sequence.

Step 1: Before installation, confirm whether the motor and planetary gear reducer are complete and undamaged, and strictly whether the dimensions of each part adjacent to the drive motor and the reducer are aligned. This refers to the size and common service between the positioning boss and shaft diameter of the drive motor flange and the positioning groove and aperture of the reducer flange; wipe and dispose of the common appearance of dirt and burrs.

Step 2: Unscrew the screw plug on the process hole on the side of the flange of the reducer, rotate the input end of the reducer, align the holding hexagon socket screw cap with the process hole, insert the hexagon socket tool to loosen and tighten the hexagon socket screw .

Step 3: Hold the drive motor so that the keyway on the shaft is perpendicular to the screw in the input end hole of the reducer, and insert the drive motor shaft into the input end hole of the reducer. When inserting, it must be ensured that the concentricity of the two is equal and the flanges on both sides are parallel. It seems that the difference in heart degree, etc. or the unyielding of the flanges on both sides must be investigated for the reason. In addition, it is strictly forbidden to use hammering during the installation, that is, it can prevent the axial or radial force of the hammer from damaging the bearings of the two, and it can be determined by the feel of the device to determine whether the two are in line. The key to decisively that the two have the same concentricity and flange parallelism is: after the two are inserted into each other, the two flanges are basically tight, and the loopholes are the same.

Step 4: In order to ensure that the connecting force of the two flanges is symmetrical, first screw the fastening screws of the drive motor arbitrarily, but do not tighten them; then gradually tighten the four fastening screws according to the diagonal position; finally tighten the planetary gear Hold the screw in the input end hole of the geared motor. Be sure to tighten the fastening screw of the drive motor first, and then tighten the input end hole of the reducer to hold the screw. Meticulous: The accurate placement between the reducer and the machine setting equipment is similar to the accurate placement between the planetary gear reducer and the drive motor. The key is that the output shaft of the planetary reducer must be concentrically aligned with the input shaft of the driven department. With the continuous and in-depth growth of the application of control motors, the application of planetary gear motors in the field of activity control drives will also increase.

Megosztás a facebookon